Polifascia thermal band

Polifascia thermal band

The propylene polifascia thermal band is the affordable and fast solution for thermally conditioning existing tanks from the outside without needing to make adaptations that might damage the containers themselves. It work indiscriminately with hot and cold water and with glycol solutions, with small percentages of alcohol or with various brines. It has a service life of 20 years exposed to weather: at +50°C it can withstand 3 Bar and stays elastic over time down to -20°C, and is impervious to chemicals. It is easy to clean thanks to its rapid installation or else transfer from one container to another.

Construction features
PesoSuperficiDimensioni serbatoiLunghezze
800 gr/m²da 336 a 3360 mm di altezzada 600 a 50000 ltfino a 12.5 m
Polifascia thermal band

- Can be connected to the conditioning system with PVC or polypropylene sealed fitting.
- Ideal for both cooling and heating.

TABLE

CodicemodelloØ serbatoiocirconf. sviluppo serbatoiosviluppo della fascia mmsup. fasce m² di ogni modulo
ND1 poli 400 400 1256 940 0.29
ND2 poli 500 500 1570 1250 0.40
ND3 poli 600 600 1880 1560 0.48
ND4 poli 700 700 2260 1940 0.60
ND5 poli 800 800 2510 2190 0.68
ND6 poli 950 900 2980 2660 0.82
ND7 poli 1100 1100 3450 3130 0.97
ND8 poli 1200 1200 3770 3450 1.10
ND9 poli 1270 1270 3990 3670 1,14
ND10 poli 1430 1430 4490 4170 1.29
ND11 poli 1580 1580 4960 4640 1.44
ND12 poli 1750 1750 5500 5180 1.61
ND13 poli 1910 1910 6000 5680 1.76
ND14 poli 2040 2040 6410 6090 1.89
ND15 poli 2100 2100 6600 6270 2.00
ND16 poli 2220 2220 6970 6650 2.06
ND17 poli 2380 2380 7470 7150 2.22
ND18 poli 2540 2540 7980 7660 2.37
ND19 poli 2860 2860 8980 8660 2.68
ND20 poli 3020 3020 9480 9160 2.84